加载...

Ground Handling

FireTrucksRolling

A first version of a plugin, allowing to request firetrucks to the current position. The plugin only provides the movement logic; firetruck models (and sound if wanted) need to be provided by the user. An example properties.ini that references a firetruck from MisterX_Library...

关于我们

A first version of a plugin, allowing to request firetrucks to the current position. The plugin only provides the movement logic; firetruck models (and sound if wanted) need to be provided by the user. An example properties.ini that references a firetruck from MisterX_Library and CDB-Library is provided; for those having those libraries installed, the plugin may work right out of the box. To be noted: airports need taxiways for the trucks to move. Should one wish sound, a sound.wav can be added to the "64" folder (in parallel to win.xpl) - sound is played via OpenAL.
Don't loose patience when waiting for the trucks. If no firestation spwaning point is defined, they are spawning at the end of the airport farthest away from the user, so 1-3 minutes waiting time can in fact happen.


Starting with 1.2 there is also an option to drive along on the roof of one of the trucks (depending on how many have already spawned this will be a different truck - it is always the last one that is already spawned and moving) - see below for a video.

Starting with 1.3 one can define where the trucks start from by adding lines to parameters.ini like:
airport=KORD;-;8648 -24 -53296

Those airport statements can contain the name of a scenery as second parameter, but this is usually not needed since starting with 1.2 those are scanned automatically, enter '-', as shown above. The 3 coordinates are the local coordinates of the spawn point (determine that for example with the help of DataRef Viewer by moving the camera there and looking at view_x, view_y and view_z datarefs.

Attention, the provided sample coordinates may or may not be perfect for a given scenery; for EDDF for example they are good for the payware version; with the default EDDF, trucks would move out the wrong direction and it might pay off to change the coordinates for that; in general those coordinates are to be understood as a starting point for finetuning, according to the specific scenery and the specific spawning points one wants.

Exposed Parameters:

vmax=30 .............the maximum speed
turnsSpeedRatio=0.67 ........... braking down to 67% max speed at turns
finalDist=200 .................... 200m before the target aircraft the trucks swarm out
turnToAircraftAfter=75............ 75m after the above point they turn towards the aircraft
strongBrakingDist=80 ............. 80m from the aircraft they start to brake
maxBrakingDist=50   ............... 50m from the aircraft they step strongly into the brakes
decelOnFinal=2 .................the braking intensity 200m before the target
decelOnFinalSlow=0.00 ....... braking when they reach speed 15, in this case no more braking
decelOnFinalStrong=8 .......... braking strength when at strongBrakingDist
decelOnFinalMax=12 ...........braking strength when at maxBrakingDist
divergeFinaElongationFact=1.4 .............. the length they drive until turning to the aircraft is turnToAircraftAfter + angle*divergeFinaElongationFact, so trucks spreading out farther drive a tad longer
standStillSoundOffAfterSeconds=15 .... turns off sound after 15 seconds
distBetweenRunningTrucks=25 ...........don't get closer than 25m to other trucks, brake if getting closer
navPathNodeReached=60 .................. turn to next taxiway/runway node when within 60m (smalle values make for exacter driving but tighter curvey - 60m leads sometimes to taking shortcuts but looks best to me)


Installation wise, the usual: unpack to the Resources/plugins folder

Usage: call single firetrucks or 3 or 5 at once. At max 9 can be summoned. All can be removed at once as well.

Jump onto the roof of the last summoned truck with the ride command.

Currently windows only. 

1.3 features:

  • added an option to define a firestations coordinates as starting point
  • exposed a lot of the driving/stopping dynamics paramters in parameters.ini
  • refined braking/acceleration dynamics
  • fixed a bug where airports so big that the center is farther away than 5km would not load routes (EDDF)
  • provided sample firestation entries for KORD,LOWW,WSSS,LSZH.PHLI and EDDF - own ones can easily be added
  • allows the trucks now to go direct after the last taxiway node - this allows them to reach planes as far as 1.5km away from a runway after an overrun
Details
兼容性
首发
September 17, 2022
最后更新
2 year(s) ago — 1.3

Version

1.3

文件大小

9.27 MB

Downloads

275

此文件已被扫描病毒,可以安全下载。

文件信息

用户
7
评价
0/5.0 — 未知
Status
尚未下载
今天的下载
0
Video Preview
Watch

未知
基于 0 评分
😢
0
悲哀
😠
0
愤怒
😮
0
震惊
🙏
0
感激
😂
0
莞尔
😍
1
恋爱

Timeline

  • Initial File Release


许可权

上传许可
你可以上传我的文件,但你必须正确地归功于我,并添加我的文件的链接。

修改许可
你必须先得到我的许可,才允许你修改或改进我的文件。

转换许可
在任何情况下,你都不允许转换这个文件。

资产使用许可
你必须先得到我的许可,才允许你使用我的文件的资产。

© Harald Nowak - All rights reserved. 未经作者事先书面同意,禁止重新上传或转发该文件。 这个飞行模拟器2020修改器是由 Harald Nowak and shared in Scenery Enhancements » Ground Handling 对于 X-Plane 12.


0 评论

成为第一个发表评论的人。


Roadmap
这些项目目前都在清单上,很快就会被处理。
Backlog
建议、错误和对未来的想法。

  • 已启动 September 17, 2022

    本文件的初始版本刚刚推出。欢迎大家加入!

常见问题解答

有问题吗?在这里找到你的解决方案。


这里很空旷

捐献

这些用户已经捐献给 Harry42 让他继续制作每个人都能享受到的超棒的附加组件。

依赖性

These add-ons may be required or recommended to use.


这里很空旷